Sliding and swing yard gates, pedestrian gates and steel doors — prepared for a motor, or with automation installed from day one.
Sliding and swing gates for yards, pedestrian gates and steel doors. We also install automation — motors, remotes and photocells.
We work across Montenegro — Herceg Novi, Kotor, Tivat, Budva, Bar and Podgorica. Measuring is free within 60 km of our workshop in Podi.
GATES · SLIDING
Sliding gates
Cantilever and track gates, with foundation, motor and remotes — made to your entrance.
MORE →
MOTORS · REMOTES
Gate automation
Nice and BFT motors for sliding and swing gates — on existing gates too.
MORE →
We make steel doors for basements, sheds, plant rooms and entrances to yards or buildings. The frame is box section; the leaf is sheet, grille or a combination.
We measure the opening on site and choose the lock, hinges and threshold for the use — a basement door is not the same as an entrance opened a hundred times a day.
Outdoors and by the sea, doors are hot-dip galvanised and powder coated in the colour of your choice.
For a level drive where there is no room in front to swing leaves. Cantilever or on a track.
For narrow drives or where there is no room to the side for a slider. Needs level ground for the leaves.
In the same infill as the main gate and fence, prepared for an electric lock and intercom.
For basements, sheds and entrances — solid, grille or combined.
For comfortable access we recommend 3.5–4 m.
A cantilever gate needs a run-back longer than the opening.
Swing gates do not open uphill without special hinges.
Steel posts in foundations, or anchors into a masonry pillar.
Solid lower panel and bars with decorative detailing.
Black steel with crossed bars and mesh infill, hung on an existing pillar.
Vertical bars with cross bracing, the gate in the same infill.
Solid lower panel and decorative elements, before protection and painting.
A steel door with geometric infill at a building entrance.
Every gate is made to the entrance, so we price each one individually. Five things matter most.
Sliding where there is room to the side but not in front; swing where the drive is narrow or there is no side room. We suggest a solution for your site at the survey.
Yes. We install Nice and BFT motors, or Came or FAAC on request, on new and existing gates.
We send a drawing and quote within 48 hours. Fabrication usually takes 10–20 days, installation one or two days.
Yes. The gate, pedestrian gate and yard fence are made in the same infill and colour.
We do not currently make roller or sectional garage doors. We make steel doors for basements, sheds and entrances.
Tell us what you need — we call back within a working day and send a quote with a drawing within 48 hours.
We will call you back on the number you gave within a working day.
By the sea it is the protection that decides, not the thickness of the steel. Before we quote, we ask where the structure will stand and how far it is from the water.
The strongest and cheapest option, but only with galvanising and powder coating. Left unprotected on the coast it rusts within a single season.
For handrails and railings by the sea. AISI 316 where there is salt and spray, 304 for interiors and the inland areas.
Light and rust-free — for lightweight structures and parts that are hard to reach for maintenance.
Immersion in molten zinc protects the inside of the profile as well. Powder coating in your RAL colour goes on top.