GATES · SLIDING
Custom sliding gates — cantilever and track, with motors
Sliding yard gates — cantilever or on a track, with foundation, motor and remotes, made to your entrance.
Sliding yard gates — cantilever or on a track, with foundation, motor and remotes, made to your entrance.
A sliding gate takes no space in front of the entrance, so it is the first choice for yards on a street and sloping drives. For years of smooth running, what matters is a straight frame, a good foundation and a carriage beam exactly in line — so we lay the foundation ourselves or give your builder exact dimensions.
We work across Montenegro — Herceg Novi, Kotor, Tivat, Budva, Bar and Podgorica. Measuring is free within 60 km of our workshop in Podi.
Runs on roller carriages on a beam beside the entrance — no track on the ground, so gravel and leaves do not matter. Needs side room longer than the opening.
Runs on a track along its full travel. Needs less side room, but the track must stay clean and level.
A pedestrian gate in the same infill beside the slider or built into a pillar.
Vertical bars, solid sheet, slats or a mix — to match the fence and the privacy you want.
For a cantilever gate: a 4 m opening needs about 5.6–6 m of clear run along the fence.
Under the section where the carriages sit; for a track — a concrete strip along the full length.
Wider openings need a heavier frame and a stronger motor.
A duct for the cable from the house to the motor, laid before the concrete.
The carriage beam is set into the foundation in line and level. An error of a few millimetres here is felt every time the gate moves.
Box sections with bracing so the gate does not twist over the years; outdoors hot-dip galvanised and powder coated.
A rack-driven motor, remotes, photocells and a warning light. More on our gate automation page.
A sliding gate is priced to the entrance. These things matter most.
A cantilever gate needs roughly the opening width plus 40–50%, e.g. 5.6–6 m for a 4 m opening. A track gate needs less, about the width of the opening.
A cantilever gate has no track on the ground, so gravel, leaves and ice do not bother it, but it needs more side room. A track gate suits a short run.
Yes — that is its advantage over a swing gate, since it slides along the fence. The beam foundation must be level.
Usually Nice or BFT, as both have distributors and spare parts in Montenegro. We size the motor to the weight and length of the gate.
The motor has a manual key release, so the gate can be opened by hand. Battery-backed models are also available.
Tell us what you need — we call back within a working day and send a quote with a drawing within 48 hours.
We will call you back on the number you gave within a working day.
By the sea it is the protection that decides, not the thickness of the steel. Before we quote, we ask where the structure will stand and how far it is from the water.
The strongest and cheapest option, but only with galvanising and powder coating. Left unprotected on the coast it rusts within a single season.
For handrails and railings by the sea. AISI 316 where there is salt and spray, 304 for interiors and the inland areas.
Light and rust-free — for lightweight structures and parts that are hard to reach for maintenance.
Immersion in molten zinc protects the inside of the profile as well. Powder coating in your RAL colour goes on top.